Organic Polymer Market by Product Type, Material, End-User - Global Forecast 2025–2030, (n.d.). https://www.researchandmarkets.com/reports/5674366/organic-polymer-market-by-product-type#tag-pos-1 (accessed December 19, 2024)

Advances in selective laser sintering of polymers - Han, W.; Kong, L.; Xu, M. (Int J Extrem Manuf, 2022)

Additive manufacturing: polymers applicable for Laser sintering (LS) - Schmid, M.; Wegener, K. (Procedia Eng, 2016)

An investigation on mechanical properties of PA12 parts produced by a SLS 3D printer: An experimental approach - Razaviye, M. K.; Tafti, R. A.; Khajehmohammadi, M. (CIRP J Manuf Sci Technol, 2022)

Cai C, Shian Tey W, Chen J, Zhu W, Liu X, Liu T, Zhao L, Zhou K (2020) Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion. https://doi.org/10.1016/j.jmatprotec.2020.116882

On the reuse of SLS polyamide 12 powder - Gomes, P. C.; Piñeiro, O. G.; Alves, A. C.; Carneiro, O. S. (Materials, 2022)

Mechanical and structural evaluation of the PA12 desktop selective laser sintering printed parts regarding printing strategy - Tomanik, M.; Zmudzińska, M.; Wojtków, M. (3D Print Addit Manuf, 2021)

Experimental investigations on metallization in laser-sintered PA12 part using RF sputtering - Baligidad, S. M.; Kumar, G. C.; Maharudresh, A. C.; Elangovan, K. (Appl Phys A Mater Sci Process, 2021)

Failure analysis of additively manufactured polyester test specimens exposed to various liquid media - Carrete, I. A.; Bermudez, D.; Aguirre, C.; Alvarez-Primo, F. A.; Anil-Kumar, S.; Chinolla, P.; Gamboa, M.; Gonzalez, S. A.; Heredia, H. E.; Hernandez, A. M.; Levario, E.; Lindquist, J. R.; et al. (J Fail Anal Prev, 2019)

Influence of build orientation and part thickness on tensile properties of polyamide 12 parts manufactured by selective laser sintering - Slager, J. J.; Earp, B. C.; Ibrahim, A. M. (Polymers (Basel), 2024)

Thickness dependent anisotropy of mechanical properties and inhomogeneous porosity characteristics in laser-sintered polyamide 12 specimens - Sindinger, S. L.; Kralovec, C.; Tasch, D.; Schagerl, M. (Addit Manuf, 2020)

Thin-walled part properties in powder bed fusion of polymers—a comparative study on temperature development and part performance depending on part thickness and orientation - Jaksch, A.; Cholewa, S.; Drummer, D. (J Manuf Mater Process, 2023)

Thickness dependency of mechanical properties of laser-sintered polyamide lightweight structures - Tasch, D.; Mad, A.; Stadlbauer, R.; Schagerl, M. (Addit Manuf, 2018)

Material anisotropy in additively manufactured polymers and polymer composites: a review - Zohdi, N.; Yang, R. C. (Polymers (Basel), 2021)

Effects of electroplating on the mechanical properties of stereolithography and laser sintered parts - Saleh, N.; Hopkinson, N.; Hague, R. J. M.; Wise, S. (Rapid Prototyp J, 2004)

Wise S, Bobbio L, Russo A, Simpson T, Beese AM (2022) Strength comparison of topology optimized lattice from printed SLA resin, electroplated resin and PBF aluminum alloy. https://doi.org/10.26153/TSW/44368

Experimental evaluation of selectively laser sintered polyamide 12 surface treatment for direct electrodeposition - Krupova, H.; Sternadelova, K.; Mesicek, J.; Ma, Q. P.; Hajnys, J. (Prog Org Coat, 2024)

Use of polymer scaffolding and electroplating to create porous metal structures - Mihalko, A.; Felice, J.; Madura, A.; Piovesan, D. (J Eng Mater Technol, 2019)

Electroplating on electrically conductive filaments for additive manufacturing - Eßbach, C.; Förster, W.; Fischer, D.; Dietrich, D.; Neumann, P.; Nickel, D. (Macromol Mater Eng, 2024)

The emerging role of electrodeposition in additive manufacturing - Braun, T. M.; Schwartz, D. T. (Electrochem Soc Interface, 2016)

Muralidhara HB, Banerjee S (2021) 3D printing technology and its diverse applications, 3D printing technology and its diverse applications. https://doi.org/10.1201/9781003145349/3D-PRINTING-TECHNOLOGY-DIVERSE-APPLICATIONS-MURALIDHARA-SOUMITRA-BANERJEE

A review on the direct electroplating of polymeric materials - Augustyn, P.; Rytlewski, P.; Moraczewski, K.; Mazurkiewicz, A. (J Mater Sci, 2021)

Selective electroplating for 3D-printed electronics - Lazarus, N.; Bedair, S. S.; Hawasli, S. H.; Kim, M. J.; Wiley, B. J.; Smith, G. L. (Adv Mater Technol, 2019)

Selective electroplating of 3D printed parts - Angel, K.; Tsang, H. H.; Bedair, S. S.; Smith, G. L.; Lazarus, N. (Addit Manuf, 2018)

Muguruza A, Bo JB, Gómez A, Minguella-Canela J, Fernandes J, Ramos F, Xuriguera E, Varea A, Cirera A (2017) Development of a multi-material additive manufacturing process for electronic devices, in: Procedia Manuf, Elsevier B.V., pp. 746–753. https://doi.org/10.1016/j.promfg.2017.09.180

Compressive behovior of pyramidal, tetrahedral, and strut-reinforced tetrahedral ABS and electroplated cellular solids - Markkuia, S.; Storck, S.; Burns, D.; Zupan, M. (Adv Eng Mater, 2009)

Storck S, Esteeves J, M.Z.-S. Journal, undefined 2012, Development of new lightweight hybrid sandwich cores using FDM technology, Hero.Epa.Gov (n.d.). https://hero.epa.gov/hero/index.cfm/reference/details/reference_id/1479832 (accessed December 19, 2024)

Simonson K, Vyshniakova K, Nawrocki R, El-Shahat A, Newell B (2023) The effects of electroplating on the mechanical properties of additively manufactured structures, Proceedings of ASME 2023 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS. https://doi.org/10.1115/SMASIS2023-110933

Effect of additives and print orientation on the properties of laser sintering-printed polyamide 12 components - Zárybnická, L.; Petrů, J.; Krpec, P.; Pagáč, M. (Polymers (Basel), 2022)

Metallization of polymers and composites: state-of-the-art approaches - Melentiev, R.; Yudhanto, A.; Tao, R.; Vuchkov, T.; Lubineau, G. (Mater Des, 2022)

Challenges in electroplating of additive manufactured ABS plastics - Eßbach, C.; Fischer, D.; Nickel, D. (J Manuf Process, 2021)

Multifunctional polymer-metal lattice composites via hybrid additive manufacturing technology - He, L.; Wang, P.; Wang, L.; Chen, M.; Liu, H.; Li, J. (Micromachines, 2023)

Ibrahim AM, Earp BC, Slager J, Beaver WE (2024) Incorporating additive manufacturing methods into structural model testing, in: ISOPE International Ocean and Polar Engineering Conference, ISOPE, 2024: p. ISOPE-I

Development of a segmented model of a medium-sized semi-displacement vessel - Ibrahim, A. M.; Morabito, M. G.; Beaver, W. (SNAME Maritime Convention, SMC, 2022)

Investigations of hull girder slamming factor for a semi-displacement vessel using model testing - Ibrahim, A. M.; Judge, C. Q. (Appl Ocean Res, 2024)

Experimental investigation of motions and global hull girder bending moment of a semi-displacement vessel - Judge, C. Q.; Ibrahim, A. M. (Ocean Eng, 2025)

ASTM D638 Standard test method for tensile properties of plastics, (2014). https://doi.org/10.1520/D0638-14

Effects of laser power and hatch orientation on final properties of PA12 parts produced by selective laser sintering - El Magri, A.; Bencaid, S. E.; Vanaei, H. R.; Vaudreuil, S. (Polymers (Basel), 2022)

ASTM B604 Standard specification for decorative electroplated coatings of copper plus nickel plus chromium on plastics, ASTM International (2019). https://doi.org/10.1520/B0604-91R19

ASTM B727 Standard practice for preparation of plastics materials for electroplating, (2020). https://doi.org/10.1520/B0727-04R20

ASTM B832 Standard guide for electroforming with nickel and copper, ASTM International (2018). https://doi.org/10.1520/B0832-93R18

Mitchell P (2024) Tool and manufacturing engineers handbook: plastic part manufacturing, 1996. https://books.google.com/books?hl=en&lr=&id=Q4X1ovFVBvoC&oi=fnd&pg=PR11&dq=Tool+and+Manufacturing+Engineers+Handbook,+vol.+8+Plastic+Part+Manufacturing,+Society+of+Manufacturing+Engineers,+Dearborn,+MI,+USA,+1996,+Chapter+9:+Coatings,+Metal+Deposition&ots=opj7si5uTo&sig=zkkC6Yy0oIwx4IpLOhVXEBQFNdI (accessed December 4, 2024)

Mechanical and metallographic characterization of LIGA fabricated nickel and 80%Ni-20%Fe permalloy - Christenson, T. R.; Buchheit, T. E.; Schmale, D. T.; Bourcier, R. J. (MRS Online Proceedings Library (OPL), 1998)

EBSD studies on wear-induced subsurface regions in LIGA nickel - Prasad, S. V.; Michael, J. R.; Christenson, T. R. (Scr Mater, 2003)

Goods SH, Kelly JJ, Talin AA, Rao Z, Hearne SJ, Chason E, Zhang H, Zhang N, Fang F (2006) Electrodeposition of Ni from low-temperature sulfamate electrolytes: I. Electrochemistry and film stress, Iopscience.Iop.Org (2006). https://doi.org/10.1149/1.2181439

Goods S, Kelly J, Talin A, JMJ of T, undefined (2006) Electrodeposition of Ni from low-temperature sulfamate electrolytes: II. Properties and structure of electrodeposits, Iopscience.Iop.Org. https://doi.org/10.1149/1.2181447

Allameh SM, Lou J, Kavishe F, Bucheit T, Soboyejo WO, On the fatigue and fracture of LIGA Nickel Foils, (n.d.)

Influence of lower current densities on the residual stress and structure of thick nickel electrodeposits - Pathak, S.; Guinard, M.; Vernooij, M. G. C.; Cousin, B.; Wang, Z.; Michler, J.; Philippe, L. (Surf Coat Technol, 2011)

Sharpe Jr WN, McAleavey A (1998) Tensile properties of LIGA nickel, in: materials and device characterization in micromachining, SPIE, 1998: pp. 130–137

Factors influencing damascene feature fill using copper PVD and electroplating - Reid, J.; Mayer, S.; Broadhent, E.; Klawuhn, E.; Ashtiani, K. (Solid State Technol, 2000)

Formlabs, Nylon 12 Powder SLS powder for strong, functional prototypes and end-use parts, 2020. https://formlabs-media.formlabs.com/datasheets/2001447-TDS-ENUS-0.pdf (accessed May 17, 2024)

Effect of PA12 powder reuse on coalescence behaviour and microstructure of SLS parts - Dadbakhsh, S.; Verbelen, L.; Verkinderen, O.; Strobbe, D.; Puyvelde, P.; Kruth, J. P. (Eur Polym J, 2017)

Flatwise to upright build orientations under three-point bending test of Nylon 12 (PA12) additively manufactured by SLS - Baba, M. N. (Polymers (Basel), 2022)

Mechanical properties of PA6/PA12 blend specimens prepared by selective laser sintering - Salmoria, G. V.; Leite, J. L.; Vieira, L. F.; Pires, A. T. N.; Roesler, C. R. M. (Polym Test, 2012)

Formlabs, Using Nylon 12, (2021). https://support.formlabs.com/s/article/Using-Nylon-12?language=en_US (accessed May 17, 2024)

American Society for Testing and Materials, Test method for tensile properties of plastics by use of microtensile specimens, ASTM D1708–02A (2018). https://doi.org/10.1520/D1708-18

Tension and compression testing of single-crystalline gamma Ti-55.5 pct Al - Zupan, M.; Hemker, K. J. (Metall Mater Trans A, 1998)

Tensile and compression testing of single-crystal gamma Ti-55.5 Al - Zupan, M.; LaVan, D.; Hemker, K. J. (MRS Online Proc Libr, 1996)

Location and orientation specific material property evaluation of friction stir welded Ti-5111: a microsample approach - Nimer, S.; Wolk, J.; Zupan, M. (Adv Eng Mater, 2014)

Cheng C (2008) Mechanical and microstructural characterization of copper microsamples after cold drawing, Master’s Thesis, 2008. https://search.proquest.com/openview/f9600a1ae25c6faa1fc2c77fa98430e8/1?pq-origsite=gscholar&cbl=18750 (accessed January 12, 2025)

Caroline Scheck CC, Tran K, Zupan M (2011) Impact of ultrasonic impact treatment on a 5456 aluminum alloy characterized through micro-specimen testing and X-Ray tomography, in: TMS 2011 140th Annual Meeting and exhibition, materials fabrication, properties, characterization, and modeling, John Wiley & Sons, 2011: p. 205

ASTM D618–21 Standard practice for conditioning plastics for testing, ASTM International (2021). https://www.astm.org/d0618-21.html (accessed January 24, 2025)

Tensile properties and microstructures of laser-formed Ti-6Al-4V - Alcisto, J.; Enriquez, A.; Garcia, H.; Hinkson, S.; Steelman, T.; Silverman, E.; Valdovino, P.; Gigerenzer, H.; Foyos, J.; Ogren, J.; Dorey, J.; Karg, K.; et al. (J Mater Eng Perform, 2011)