Condition based maintenance of bearings and gears for fault detection—a review - Kumar, S.; Goyal, D.; Dang, R. K.; Dhami, S. S.; Pabla, B. S. (Mater Today, 2018)

Multi-fault diagnosis of industrial rotating machines using data-driven approach : a review of two decades of research - Gawde, S.; Patil, S.; Kumar, S.; Kamat, P.; Kotecha, K.; Abraham, A. (Eng Appl Artif Intell, 2023)

Review of condition monitoring and fault diagnosis technologies for wind turbine gearbox - Nie, M.; Wang, L. (Procedia CIRP, 2013)

Latest developments in gear defect diagnosis and prognosis: A review - Kumar, A.; Gandhi, C. P.; Zhou, Y.; Kumar, R.; Xiang, J. (Measurement, 2020)

Comparing data sources for condition monitoring suitability - Fromberger, M.; Sendlbeck, S.; Rothemund, M.; Götz, J.; Otto, M.; Stahl, K. (Forsch Ingenieurwes, 2019)

A review on diagnostic and prognostic approaches for gears - Kundu, P.; Darpe, A. K.; Kulkarni, M. S. (Struct Health Monit, 2021)

A review on wind turbines gearbox fault diagnosis methods - Gu, H.; Liu, W. Y.; Gao, Q. W.; Zhang, Y. (J Vibroengineering, 2021)

Vibration-based condition monitoring: industrial, automotive and aerospace applications - Randall, R. B. (Standards Information Network, 2021)

Influence of pitting on total transmission error of a planetary gear stage - Weinberger, U.; Otto, M.; Stahl, K. (Inter-noise Noise-con Congr Conf Proc, 2016)

Acoustical behavior of loss-optimized involute gears - Sepp, S.; Goetz, J.; Stahl, K. (Inter Noise, 2021)

Improvements on noise reduction and efficiency of gears - Höhn, B. R. (Meccanica, 2010)

Gear condition monitoring by augmenting measured transmission error data for gear damage and propagation estimation - Sendlbeck, S.; Patel, S. V.; Otto, M.; Stahl, K. (Int J Powertrains, 2023)

Assessment of the vibration excitation and optimization of cylindrical gears - Höhn, B.; Heider, M.; Stahl, K.; Otto, M.; Bihr, J. (Information, 2011)

Effect of pitting on excitation behaviour of a planetary gear set with sequential mesh phasing - Weinberger, U.; Kohn, B.; Fromberger, M.; Otto, M.; Stahl, K. (International Institute of Acoustics and Vibration, 2017)

Rolling element bearing diagnostics—a tutorial - Randall, R. B.; Antoni, J. (Mech Syst Signal Process, 2011)

Condition monitoring parameters for fault diagnosis of fixed axis gearbox: a review - Goyal, D.; Vanraj, P. B. S.; Dhami, S. S. (Arch Comput Methods Eng, 2017)

A review of gear fault diagnosis using various condition indicators - Sharma, V.; Parey, A. (Procedia Eng, 2016)

A review of time synchronous average algorithms - Bechhoefer, E.; Kingsley, M. (Annual Conference of the PHM Society, 2021)

The synchronous (time domain) average revisited - Braun, S. (Mech Syst Signal Process, 2011)

A review on the use of angle measurements in gear condition monitoring and fault detection - Koch, Y.; Sendlbeck, S.; Otto, M.; Stahl, K.; Kirchner, E. (Mech Syst Signal Process, 2025)

Evaluating signal processing methods for use in gearbox condition monitoring - Fromberger, M.; Weinberger, U.; Sc, M.; Kohn, B.; Utakapan, T.; Otto, M.; Stahl, K. (International Institute of Acoustics and Vibration, 2017)

Recent advances in the application of deep learning for fault diagnosis of rotating machinery using vibration signals - Tama, B. A.; Vania, M.; Lee, S.; Lim, S. (Artif Intell Rev, 2023)

A review on deep learning based condition monitoring and fault diagnosis of rotating machinery - Gangsar, P.; Bajpei, A. R.; Porwal, R. (Noise Vib Worldw, 2022)

Gradient-based learning applied to document recognition - Lecun, Y.; Bottou, L.; Bengio, Y.; Haffner, P. (Proc Ieee, 1998)

Finding structure in time - Elman, J. L. (Cogn Sci, 1990)

Long short-term memory - Hochreiter, S.; Schmidhuber, J. (Neural Comput, 1997)

Reducing the dimensionality of data with neural networks - Hinton, G. E.; Salakhutdinov, R. R. (Science, 2006)

Stochastic backpropagation and approximate inference in deep generative models - Rezende, D. J.; Mohamed, S.; Wierstra, D. (ICML, 2014)

Auto-encoding variational bayes - Kingma, D. P.; Welling, M. (2013)

Multi-mode fault diagnosis datasets of gearbox under variable working conditions - Chen, S.; Liu, Z.; He, X.; Zou, D.; Zhou, D. (Data Brief, 2024)

A review on deep learning in planetary gearbox health state recognition: methods, applications, and dataset publication - Liu, D.; Cui, L.; Cheng, W. (Meas Sci Technol, 2023)

PHM Society (2010) Gearbox fault detection data set. https://c3.ndc.nasa.gov/dashlink/resources/997/. Accessed 12 Mar 2025

Domain generalization for cross-domain fault diagnosis: an application-oriented perspective and a benchmark study - Zhao, C.; Zio, E.; Shen, W. (Reliab Eng Syst Saf, 2024)

Open heterogeneous data for condition monitoring of multi faults in rotating machines used in different operating conditions - Soualhi, M.; Soualhi, A.; Nguyen, K. T. P.; Medjaher, K.; Guy, C.; Hubert, R. (Int J Progn Health Manag, 2023)

Review of imbalanced fault diagnosis technology based on generative adversarial networks - Chen, H.; Wei, J.; Huang, H.; Yuan, Y.; Wang, J. (J Comput Des Eng, 2024)

A survey on deep learning tools dealing with data scarcity: definitions, challenges, solutions, tips, and applications - Alzubaidi, L.; Bai, J.; Al-Sabaawi, A.; Santamaría, J.; Albahri, A. S.; Al-dabbagh, B. S. N.; Fadhel, M. A.; Manoufali, M.; Zhang, J.; Al-Timemy, A. H. (J Big Data, 2023)

A perspective survey on deep transfer learning for fault diagnosis in industrial scenarios: theories, applications and challenges - Li, W.; Huang, R.; Li, J.; Liao, Y.; Chen, Z.; He, G.; Yan, R.; Gryllias, K. (Mech Syst Signal Process, 2022)

Transfer learning-motivated intelligent fault diagnosis designs: a survey, insights, and perspectives - Chen, H.; Luo, H.; Huang, B.; Jiang, B.; Kaynak, O. (IEEE Trans Neural Netw Learn Syst, 2024)

Deep learning based approaches for intelligent industrial machinery health management and fault diagnosis in resource-constrained environments - Saeed, A.; Khan, A. M.; Akram, U.; Obidallah, J. W.; Jawed, S.; Ahmad, A. (Sci Rep, 2025)

Enhancing reliability through interpretability: a comprehensive survey of interpretable intelligent fault diagnosis in rotating machinery - Chen, G.; Yuan, J.; Zhang, Y.; Zhu, H.; Huang, R.; Wang, F.; Li, W. (IEEE Access, 2024)

Fault diagnosis using eXplainable AI: a transfer learning-based approach for rotating machinery exploiting augmented synthetic data - Brito, L. C.; Susto, G. A.; Brito, J. N.; Duarte, M. A. V. (Expert Syst Appl, 2023)

Physics-informed neural networks: a deep learning framework for solving forward and inverse problems involving nonlinear partial differential equations - Raissi, M.; Perdikaris, P.; Karniadakis, G. E. (J Comput Phys, 2019)

Scientific machine learning through physics–informed neural networks: where we are and what’s next - Cuomo, S.; Cola, V. S.; Giampaolo, F.; Rozza, G.; Raissi, M.; Piccialli, F. (J Sci Comput, 2022)

Multitask learning - Caruana, R. (Mach Learn, 1997)

A survey on multi-task learning - Zhang, Y.; Yang, Q. (IEEE Trans Knowl Data Eng, 2022)

Multitask learning based on lightweight 1DCNN for fault diagnosis of wheelset bearings - Liu, Z.; Wang, H.; Liu, J.; Qin, Y.; Peng, D. (IEEE Trans Instrum Meas, 2021)

Enhanced discriminate feature learning deep residual CNN for multitask bearing fault diagnosis with information fusion - Niu, G.; Liu, E.; Wang, X.; Ziehl, P.; Zhang, B. (IEEE Trans Ind Informatics, 2023)

Multitask convolutional neural network with information fusion for bearing fault diagnosis and localization - Guo, S.; Zhang, B.; Yang, T.; Lyu, D.; Gao, W. (IEEE Trans Ind Electron, 2020)

Lebold M, Mc Clintic K, Campbell R, Byington C, Maynard K (2000) Review of vibration analysis methods for gearbox diagnostics and prognostics. https://citeseerx.ist.psu.edu/document?repid=rep1&type=pdf&doi=bcb1e7fe9b9086b9ae6c4e9838578bb7824f9ec6

Vaswani A, Shazeer N, Parmar N, Uszkoreit J, Jones L, Gomez AN, Kaiser L, Polosukhin I (2017) Attention is all you need. In: advances in neural information processing systems, vol 30. Curran associates, inc. https://proceedings.neurips.cc/paper_files/paper/2017/file/3f5ee243547dee91fbd053c1c4a845aa-Paper.pdf

Transformer-based intelligent fault diagnosis methods of mechanical equipment: a survey - Wang, R.; Dong, E.; Cheng, Z.; Liu, Z.; Jia, X. (Open Phys, 2024)

Roformer: enhanced transformer with rotary position embedding - Su, J.; Ahmed, M.; Lu, Y.; Pan, S.; Bo, W.; Liu, Y. (Neurocomputing, 2024)

FaultFormer: Pretraining transformers for adaptable bearing fault classification - Zhou, A. Y.; Farimani, A. B. (IEEE Access, 2023)

Explainable artificial intelligence (XAI) techniques for energy and power systems: Review, challenges and opportunities - Machlev, R.; Heistrene, L.; Perl, M.; Levy, K. Y.; Belikov, J.; Mannor, S.; Levron, Y. (Energy Ai, 2022)

Mobilenets: efficient convolutional neural networks for mobile vision applications - Howard, A. G.; Zhu, M.; Chen, B.; Kalenichenko, D.; Wang, W.; Weyand, T.; Andreetto, M.; Adam, H. (2017)

Network in network - Lin, M.; Chen, Q.; Yan, S. (2013)

Batch normalization: accelerating deep network training by reducing internal covariate shift - Ioffe, S.; Szegedy, C. (ICML, 2015)

FZG test procedures—part 1: FZG test procedure A/8,3/90 to determine the relative scuffing load-carrying capacity of oils (Beuth-Verlag, 2006)

Modular extension of FZG-gear test RIG for in-situ measurement possibilities - Knoll, E.; Rupprecht, B.; Groppo, E.; Otto, M.; Vogel-Heuser, B.; Brederlow, R.; Stahl, K.; Bonaiti, L.; Gorla, C. (International Institute of Acoustics and Vibration, 2023)

Time varying mesh stiffness calculation of spur gear pair considering sliding friction and spalling defects - Saxena, A.; Parey, A.; Chouksey, M. (Eng Fail Anal, 2016)

The similarity bias problem: What it is and how it impacts vibration based intelligent fault diagnosis - Varejão, I. M. S.; Costa, L. G. O.; Silva, L. H. P.; Rodrigues, A.; Ribeiro, M. P.; Varejão, F. M.; Oliveira-Santos, T. (Mech Syst Signal Process, 2025)

Decoupled weight decay regularization - Loshchilov, I.; Hutter, F. (2017)

Rethinking the inception architecture for computer vision - Szegedy, C.; Vanhoucke, V.; Ioffe, S.; Shlens, J.; Wojna, Z. (IEEE, 2016)

Greedy function approximation: a gradient boosting machine - Friedman, J. H. (Ann Stat, 2001)

LightGBM: a highly efficient gradient boosting decision tree - Ke, G.; Meng, Q.; Finley, T.; Wang, T.; Chen, W.; Ma, W.; Ye, Q.; Liu, T. Y. (Neural Inf Process Syst, 2017)

The spectral kurtosis: a useful tool for characterising non-stationary signals - Antoni, J. (Mech Syst Signal Process, 2006)

Fast computation of the kurtogram for the detection of transient faults - Antoni, J. (Mech Syst Signal Process, 2007)

Decker HJ (2003) Spiral bevel pinion crack detection in a helicopter gearbox. Natl Aeronaut Space Adm Clevel Oh Glenn Res Cent

Maximum correlated kurtosis deconvolution and application on gear tooth chip fault detection - McDonald, G. L.; Zhao, Q.; Zuo, M. J. (Mech Syst Signal Process, 2012)

Sliding time synchronous averaging based on independent extended autocorrelation function for feature extraction of bearing fault - Liu, T.; Li, L.; Noman, K.; Li, Y. (Meas, 2024)

A new deep learning model for fault diagnosis with good anti-noise and domain adaptation ability on raw vibration signals - Zhang, W.; Peng, G.; Li, C.; Chen, Y.; Zhang, Z. (Sensors, 2017)

Why should I trust you?: explaining the predictions of any classifier - Ribeiro, M. T.; Singh, S.; Guestrin, C. (ACM, 2016)

Lundberg SM, Lee SI (2017) A unified approach to interpreting model predictions. Adv Neural Inf Process Syst 30:

Learning deep features for discriminative localization - Zhou, B.; Khosla, A.; Lapedriza, A.; Oliva, A.; Torralba, A. (2016)

Vibration-based gear continuous generating grinding fault classification and interpretation with deep convolutional neural network - Liu, C.; Meerten, Y.; Declercq, K.; Gryllias, K. (J Manuf Process, 2022)

Axiomatic attribution for deep networks - Sundararajan, M.; Taly, A.; Yan, Q. (PMLR, 2017)

Learning important features through propagating activation differences - Shrikumar, A.; Greenside, P.; Kundaje, A. (PMLR, 2017)

Explainable artificial intelligence (XAI): concepts, taxonomies, opportunities and challenges toward responsible AI - Barredo Arrieta, A.; Díaz-Rodríguez, N.; Ser, J.; Bennetot, A.; Tabik, S.; Barbado, A.; Garcia, S.; Gil-Lopez, S.; Molina, D.; Benjamins, R. (Inf Fusion, 2020)

Explainable AI: A review of machine learning interpretability methods - Linardatos, P.; Papastefanopoulos, V.; Kotsiantis, S. (Entropy, 2020)